Home › Products › Vacuum valves › Aluminum alloy angle valve › Aluminum block valves

Aluminum alloy angle valve

Category
Specification

Aluminum block valves

All in one HV aluminum angle valve

Aluminum angle valve manual with formed bellows

Aluminum angle valve manual without formed bellows

Pneumatic normally open single with bellows, sensor & solenoid

Pneumatic normally open single with bellows & sensor

HV aluminum angle valve-Pneumatic valve with bellows

Aluminum angle valve with sensor-bellows

HV aluminum angle valve - pneumatic nobellows seal, Normal close

HV aluminum angle valve - pneumatic nobellows seal with sensor, Normal close

Aluminum angle valve pneumatic single-acting with bellows solenoid

Aluminum angle valve pneumatic double-acting with bellows sensor

Aluminum block valves Technical Data

Pilot valve Naminal voltage Power DC voltage AC voltage Nominal diameter	Product nameplate 2.4W 3.6VA 1.2mm
Electrical position indicator Connection Rating	Soldered joints 125VAC/1A 30VDC/0.5A
Vacuum connection	KF16			KF25		KF40
Actuation	opening : pneumatic closing : by pressure spring
Compressed air supply Tube connection Pressure range Piston displacement	Ø6 mm 4~6 Kg/cm²(overpressure)
	4 cm³		11 cm³		35 cm³
Stroke of valve plate	6 mm		8 mm		13 mm
Conductance Angle valve	5 l/s		14 l/s		45 l/s
Switching frequency Opening time Closing time	10/min 100ms 100ms		10/min 120ms 160ms		8/min 260ms 540ms
Cycle life*	10 million
Leak Rate	1x10^-9 mbar.l/s
Pressure max.	5 bar(absolute)
Operating pressure min.	1x10^-8 mbar
Operating pressure max.	2 bar
Pressure difference △p In closing direction In opening direction	5 bar 2 bar
Temperature Ambiance Bakeout Housing Aluminum Actuator Pilot valve	0°C…+50°C 80°C 50°C 50°C
Mounting orientation Flow direction	Any Any
Materials Housing Aluminum Bellows/valve plate Pressure spring Seals Cover Visual position indicator Cylinder unit	A6061-T6 316Ti S.S. Spring steel Viton ABS A5083
Weight All in one Aluminum Pneumatic N/C Aluminum	0.54 kg 0.36kg	0.73kg 0.56 kg					1.34kg 1.2kg

* The Cycle life of valve is apply to room temperature 25°C and clean environment, and the opening action apply to be less than 10 mbar pressure difference. (If the opening action exceeds the pressure difference of 10 mbar, it is not covered by this guarantee.)

Warranty conditions :

1. The period of warranty shall start from the date of delivery of the product to the customer and shall cover a period of 1 year, or the specific life cycles, whichever comes first.

2. Operation only in air, inert gas and vacuum.

3. Warranty will not apply to the damages caused by nature disasters, faulty usages or consumable purposes.

Welcome to contact us , Htc Vacuum is willing to provide aluminum block valves quotation for you.

AL angle vavle
- Pneumatic
  - Spring to open air to closeNormally opened
    - Without solenoid, with sensor
    - With solenoid, with sensor
  - Air to open spring to closeNormally closed
    - Without solenoid, limit switch or sensor
    - Without solenoid, with sensor
    - With solenoid, without limit switch or sensor
    - With solenoid, limit switch & quick connector
  - Air to open air to close
    - Without solenoid,with sensor
- Manual
  - With bellows
  - Without bellows